The 4×4 wooden pieces are widely used for a lot of construction and carpentry works. That’s why it’s important to keep in mind these types of cuts in mind when you’re grabbing your miter saw.
So the main question here is can a 10 inch miter saw cut a 4×4 is? The answer to this is yes! You can make that cut with your miter saw.
If you’re new to the woodworking profession or DIYer, you must have come across the debate that what size miter saw to cut 4×4. This query might have got you confused about the purchase of your next miter saw.
There are different models of miter saws available in the market as per their blade size. You can get 8-inches, 10-inches, and 12-inch miter saws. It’s quite clear that you’ll have to pick the one that can serve you for the most types of cuts.
In this article, I’ll run you through some of the easiest ways to get the job done effortlessly. So, stick with us till the end to make the most out of your purchase. You’ll end up being more educated about the matter.
Does The Size of Saw matter more than the Saw Blade?
The size of the saw is equally important as the saw blade when it comes to making cuts through different wood materials. To enjoy the seamless cutting capacity of your tool, you need to pick the appropriate blade and saw size that meets the requirements of your project type.
Also Check Best Miter Saw
In my view, the interrogation about can you cut a 4×4 with a 10 inch miter saw should be given a more suitable aspect. You need to understand that the size and blade aren’t the only factors to decide the miter saw’s cutting capacity. There are other things like the motor power delivery and quality of blade that collectively decide the cutting capacity.
How About Cutting Through 4×4 With a 12-Inch Miter Saw?
Here you can follow the rule of thumb, the bigger the better. A 12-inch miter saw can make more wide and deep cuts as compared to a 10-inch miter saw. The fact that its blade has more teeth apart from having a larger blade, can make the job effortless.
You can always count on the 12-inch miter saw to tear apart 4×4 seamlessly if you aren’t bound to have to pick the 10-inch saw only. Its application is more fine and precise and you mostly have to do just a single pass.
Cutting 4×4 with a 10-Inch Miter Saw
You can deal with 4×4 stocks with your 10-inch miter saw, the thing to mention here is that you might have to cover some extra miles to get impeccable cuts. But if you cannot spend some extra bucks to get a 12-inch saw and have to make the deal with a 10-inch miter saw, then here you go! Follow these simple steps to make the most out of your tool without facing any hassle.
1. Mark the Stock First
First things first, grab your 4×4 pieces to mark them as per the size of the cut. You can use a pen or pencil whatever is available. But mark them prominently so that you don’t face any hardship finding your marked spots while making your cuts.
Marking your wood pieces initially will provide you with the ease of getting accurate measurements. You will steer clear of the risk of miscutting when your stocks are marked beforehand. Don’t forget to draw lines on all the sides thoroughly.
2. Prepare your Miter saw For The cuts
After the slabs are marked, then proceed towards your second step i.e. to configure your saw. Put your miter saw on the workbench to adjust the blade angles. We suggest setting it at 90 degrees angle. Or you can also double-check the accuracy of the angle with the help of a square.
3. Adjusting the position of 4×4 Stocks
To proceed further, perform the third step. Position your stocks on the bench top and make marks under the blade. Then turn the miter saw’s power on and bring it to a close with the intention of making the cuts. But be very gentle with that to be safe from any kickbacks.
And the fact that you’re using a 10-inch miter saw, don’t forget that you cannot achieve your desired accuracy in cuts in just one go. Try to make cuts on both sides of wood pieces. You need to be a bit patient with your task. If you rush to save time, you’ll only end up messing the procedure to get rough cuts.
Also Check Best 8 1/2 Sliding Miter Saw
Moreover, don’t forget to wear your safety glasses and earmuffs. It will keep you uninterrupted and safe from tiny flying wooden pieces and the noise of the saw.
The Best Saws To Cut 4×4
We know your preference is cutting 4×4 with miter saw, that’s why you’re here. But if you have the choice to go for another saw for the job, then you have a lot of other options available. You can utilize them as well to add more ease to your job.
The table saw with a 12-inches blade can deal with 4×4 cutting tasks on a single go. It offers deeper cuts as compared to a smaller saw. The 10 inch miter saw maximum cut is 3-1/8″ deep. You may get face some hurdles to make the cut in a single attempt.
The other key benefit of a table saw is that it offers you the facility of making rip cuts as well. You can cut the 4×4 stocks lengthwise with it. Or the other option is to get a vertical bandsaw for this purpose. A bandsaw can also serve you to perform re-sawing.
If you’re more focused and concerned about the accuracy and diligence of your cuts, you better choose a chainsaw. It can cut through 4×4 but it might be a risky job for a beginner to control a chain saw. It is a specialized tool and can be difficult to control for beginners.
A circular saw however is the best tool you can make in use to deal with 4×4 wood pieces. You don’t need some specialized skills to use it, unlike chain saw. It offers high precision and accuracy in the cuts. But likewise, a miter saw, you’ll have to pass the blade twice through the fence posts to make the cuts more defined and correct.
You May Also Like Best Portable Table Saw For Fine Woodworking
FAQ’s-Can a 10 Inch Miter Saw Cut a 4×4
What size miter saw can cut a 4×4?
You can use both 12-inches and 10-inches miter saw to cut through the 4×4 stocks. But it is highly recommended to go for a 12-inches tool if the high budget isn’t the hurdle for you. It can effortlessly do the cuts on a single pas unlike a 10-inches miter saw, in which you can face a hard time cutting through it on a single go. It requires the cuts to be made from both sides.
How deep will a 10-inch miter saw cut?
The 10-inch miter saw can make cuts 3-⅛” deep. It has the ability to make crosscuts through the 5 ½” wide board. You can use it to cut 2×4 lumber at a 45-degree angle. But if you’re considering using it to cut 4×4, you better change your mind to grab a 12-inc miter saw. That can handle the job more easily.
Final Words-Can a 10 Inch Miter Saw Cut a 4×4
Although using a 10-inch miter saw isn’t an ideal tool to be used for 4×4 cutting. We still made an effort to gather some safe and efficient ways to make the job hassle-free for you. If you haven’t made your purchase yet, we suggest you invest some extra bucks to get a 12-inches saw. It would be a wiser choice.
But if you’re bound to a short budget, you don’t need to be dissonant that will a 10 miter saw cut a 4×4 or not. You still can do a lot with just covering some extra miles. We wish you luck with your tasks and purchase!
I’m Thomas Steven with more than 12 years of experience in woodworking. It has always been my passion to become a successful woodworker. I have completed hundreds of successful projects. This blog is a way of sharing my woodworking experiences and what tools get the best results. I write about woodworking while being an associate with Amazon and I earn a little commission from every qualifying purchase.