7 Best Nail Guns for Crown Molding – Electric & Cordless

Do you intend to do crown molding but are confused about picking up the right tool? Well, if yes then you’ve landed on the very right page. For an interior designer or a person who loves to try different home decorating ideas, a nail gun can be of great use. 

In Hurry ? Makita AF506 is our pick for the best nail gun for crown molding. Make this your product to get the best out of your crown molding and other woodworking jobs. 

Choosing the best nail gun for crown molding can be a hard choice to make, especially among a variety of different tools available in the market. But you need not panic about the research because we’ve already done it for you. 

Best Nail Gun For Crown Molding

In this article, we have selected some best and top-rated nail guns that are worth adding to your toolbox. You can pick the one that meets your work needs the best, and enjoy the pleasant experience of crown molding with it! 

Why Crown Molding Nail Gain Instead of a Hammer?

There are mainly two ways of doing crown molding. Either do it with the typical hammering method or do it with a nail gun. If you’re a modern type of person and prioritize precision and accuracy in work, you might not wanna go for doing it with a hammer. 

Another downside of using any traditional method is that it consumes a lot of time. Hence, to get the job done quickly and effortlessly, choosing a crown molding nail gun would be a wiser choice. 

Our Recommendation

EDITOR’S CHOICE
Makita AF506
Makita AF506
 
9.8
  • Accurate and precise
  • Deals with both hard and softwood
  • Can reach confined spaces
PREMIUM PICK
DEWALT DCN680D1
DEWALT DCN680D1
 
9.5
  • Tool-free jams release
  • Effective for both high and low capacity jobs
  • Quiet in operation
BUDGET PICK
BOSTITCH BTFP1850K
BOSTITCH BTFP1850K 
 
8.9
  • Multiple depth adjustments
  • Tool-free adjustable exhaust
  • 7 years warranty

Best Nail Gun For Crown Molding

We have short-listed and reviewed these nail guns to support your buying decision. Choose any of these in order to make the best out of your tool!

1. Makita AF506 18 Gauge Brad Nailer For Crown Molding – Our Top Pick

best nail gun for crown molding

If you’re looking for the best nail gun for crown molding, then nothing can accommodate better than Makita AF506. You can count on this nailer to get your job done impeccably. 

This nail gun has the ability to drive 18 gauge nails ⅝” to 2” deep into the material. It can deal with both hard and softwood effortlessly. 

The nailer features a narrow nose that helps you to reach even compact places. It allows you to fix your crown molding accurately without affecting or damaging it. 

Moreover, the nose offers tool-less nail removal. You can easily extract the nails from the gun without any hassle. 

You can adjust the depths of your choice with its depth adjusting feature. This makes it easier to work on finishing with materials of different rigidity. 

Makita AF506 comes with an in-built dust collector that clears out the way from dust while you keep on operating the gun. A dust-free work surface increases your productivity and avoids any interruption in the work. 

The nailer is designed in a way to provides ease of control and convenience to the user. This aluminum-constructed gun weighs only 2.9 lbs, you can easily carry it during your long working hours. 

In addition, the fact that it’s aluminum-built adds to the durability of the tool. It can ideally be used for various applications such as crown molding, baseboard, trim work, and other woodworking and flooring tasks. 

Pros
  • Accuracy and precision
  • Deals with both hard and softwood
  • Can reach confined spaces
Cons
  • Jams during application sometimes

Overall, it’s a reliable tool to get your hands on to make your woodworking job more pleasant and fun!

2. DEWALT DCN680D1 20V MAX Cordless Brad Nailer Kit

best nail gun for crown molding

When it comes to power tools, you’ll always find DEWALT securing its position somewhere at the top of the list. The brand’s tools never fail to satisfy its users. 

DeWalt DCN680D1 is our second pick for the best nail gun for crown molding. This mighty cordless nail gun can handle a number of molding and finishing jobs effortlessly. 

It is powered by a battery and serves well without having any need for an air compressor, hose, and any sort of cartridge. Moreover, it is compatible with any 20V battery that belongs to the MAX series. 

When you have to draw a comparison between DEWALT DC608 and DC608D1, we suggest picking DC608D1 if accuracy is your preference. The reason is that it has a micro nose that gives a clear line of sight and offers high accuracy and precision in nail driving. 

This nail gun runs over an 18 gauge brushless motor which maximizes the machine run time and provides high durability. 

Check Also Best Nail Gun For Baseboards

You can use it for both high and low capacity jobs with its depth adjustment feature. It adds more precision and gives you the freedom of achieving the depth of your choice. 

With this nail gun, you need not to face any hassle of jam releases and actuation mode selection. Thanks to its tool-free engineered design that offers great usability and ease of handling the tool. 

Pros
  • Tool-free adjustments and jams release
  • Effective for both high and low capacity jobs
  • High in power and quiet in operation
Cons
  • Heavy in weight

All-inclusive. It’s a durable and handy tool to get possession of. It’s great value to money and can make your crown molding tasks butter smooth.

3. BOSTITCH BTFP1850K Pneumatic Electric Brad Nailer

best nail gun for crown molding

BOSTITCH BTFP1850K is another best nailer for crown molding. It’s an 18 gauge 2-inches pneumatic brad nailer that can ideally deal with a variety of woodworking jobs. 

It offers you multiple depth adjustments. You can set the depth as per your project’s requirement and deal with paneling installation, cabinet finishing, crown molding, and other finishing and trim jobs conveniently.     

You’ll enjoy its 100-fastener magazine capacity which will allow you to deal with adhesive strip-collation nails of up to 2 inches in length. 

BTFP185K features a tool-free adjustable exhaust cap that ejects the exhaust out of the machine to ensure user convenience. You can get clean and protected work surfaces with its no-mar tip. 

This tool comes in two other models as well. The 2 ⅛” oil-free brad nailer and the 2 ⅛” oil-free smart point brad nailer. You can choose from any of these nailers which suit your work requirement better. 

On its purchase, you’ll get a brad nailer and a 1/4″ swivel air fitting and carrying bag. The brand offers 7 years warranty on this nail gun. So, you can rest assured that the manufacturer has got your back in case you face any issues with the machine. 

Apart from all the wowing features, you may face some nail jamming issues after some time of use. That can cause a bit of interruption in the job. You can also consider DeWalt DCN680D1 if you want to go for a more reliable and durable nailer. 

Pros
  • Multiple depth adjustments
  • Tool-free adjustable exhaust
  • 7 years warranty
Cons
  • Lose the firing flow at times

Otherwise, BOSTITCH BTFP1850K is a good unit that you can count on to effortlessly deal with your crown molding. 

4. WEN 61721 3/8-Inch to 2-Inch Pneumatic Brad Nailer

best nail gun for crown molding

Wen 61721 is one of the top-rated nail guns that you can rely on for crown molding. 

This 2-inches pneumatic brad nailer is compatible with 18 gauge nails of length ranges from ⅜ to 2 inches. It comes with a depth adjustment wheel that gives you the freedom to choose the nail driving depth as per your requirement. 

The operating pressure in this nailer ranges from 60 to 115 PSI for smooth nail inserting. It can be easily connected to any compressor with its ¼ inch NPY air inlet.

It features a spring-loaded magazine that can facilitate up to 106 nails on a single load. In addition, it allows fast and effortless reloads and you can even check the number of remaining nails through the window located beside the magazine. 

This device is designed to offer users ease of handling and working with it for long hours without experiencing any tiresome feelings. It weighs only three pounds which makes the handling extremely smooth and convenient. 

There’s an adjustable air exhaust installed in the nailer. The direction of the pneumatic air output can be changed in any way that suits you.

Moreover, the hassle-free nose latch provides the user with an ease of quick nail extraction. There’s no need for any sort of tool to release nail jams. This can save a lot of your time during work. Without breaking the work tempo, the device can be fixed within seconds.

The best part of this machine is that it can be used by both professionals as well as beginners. The reason because it needs no extra skills to operate it. 

Pros
  • Ergonomic design
  • Quick depth adjustments
  • Spring-loaded magazine
Cons
  • Operation interruption issues

You can unhesitantly pick this nail gun to enjoy it as the best nailer for crown molding. 

5. Senco 4G0001N FinishPro 15 Gauge Finish Nailer

Senco 4G0001N FinishPro 15 Gauge Finish Nailer

Are you looking for a crown molding nail gun for professional use? If yes, then be glad that your search ends here. Senco 4G001N is the tool that can make you get through most of your professional tasks. 

This ergonomic and lightweight constructed nailer allows you to handle your job with ease. You’ll not get any tiresome experience when working with this electric nail gun for crown molding, thanks to ergonomic engineering. 

With its operating pressure of 70 to 120 PSIG, this nailer can easily drive galvanized 15-gauge as well as bright nails of 1-¼ to 2-½ inches in length into every wood material easily.

It can drive nails even into the white oak wood. This nail gun can perfectly handle crown molding, hard and soft flooring, window casing, and a number of interior and exterior trim work.  

The device features a magazine with a capacity of 104 nails that can prolong your work progress. Its EZ-clear latch improves the quality of work by preventing nail jams and resists misfiring and double nailing.

You May Also Like Best Air Compressor For Framing Crew

If you choose Senco 4G001N, this oil-free gun will release you from the hassle of its frequent maintenance. It doesn’t require any sort of lubricant to ensure a smooth application. 

4G001N is engineered innovatively to maximize its usability and user convenience. Its no-mar tip along with NeverBlue design makes the work surfaces easy to handle. It offers a stronghold against any type of slipping and rigid surfaces.

All the attributes of 4G001N are amazing but you may face some hard time with the flow of nail driving. 

Pros
  • Inexpensive
  • Great handling
  • Oil-free
Cons
  • Slow nail driving speed

But overall it can deal with most of your trimming and carpentry jobs. This gun is a great value to money because it can deal with most of your woodworking tasks.

6. PORTER-CABLE PCC790LA Cordless Brad Nailer Kit 

PORTER-CABLE PCC790LA Cordless Brad Nailer Kit

PORTER-CABLE PCC790LA is the best cordless nailer for crown molding that you can get possession of. It runs solely on battery power and eliminates the need of investing in the air compressor, hose, or any gas cartridge. 

It features a motor that offers a smooth startup even in extreme climatic conditions. It makes the nailer smoothly fire 18 gauge nails into a number of materials. 

The magazine of the gun has a capacity to store up to 100 nails. And you’ll be amazed on hearing that the one-time charge of the gun allows the firing of up to 1300 nails. 

This unit is lightweight and the user comfort is increased with its optimal center of gravity which gives little to no fatigue when holding the gun. This ease and convenience make this nailer a choice for most contractors and woodworkers who have to get to work in remote areas. 

One of the most highlighted features of the PCC790LA is that it has dual LED lights. It increases the error-free final driving by providing great illumination of the workspace. 

The price of this device is one of its downfalls but if you wisely look at all the convenience and hassle-free applications it offers, you’ll find the price justifying the machine. 

Pros
  • Hassle-free handling
  • Extended battery life
  • High Portability
Cons
  • Not so light on the pocket

You can get your hands on this machine to make your trimming and crown molding jobs effortless and butter smooth. 

7. Hitachi NT65MA4 Angled Finish Nailer with Air Duster

Hitachi NT65MA4 Angled Finish Nailer with Air Duster

If you prefer to buy a mess-free and easy-to-use tool, then Hitachi NT65MA4 angled nailer is your machine. 

Hitachi has basically renamed itself to Metabo HPT. You’ll find the same great quality power tools with a changed name. 

This nail gun is compatible with 15-gauge nails that range from 1-¼” inch to 2-½ inches in length. The angled magazine can hold up to 100 nails and allows the nailer to easily access the tight corners. 

NT65MA4 is the best nail gun for crown molding that has an integrated dust collector. It can be of great use to keep your work surface free of any sort of debris that may interrupt your work. You can conveniently prepare the workspace for nailing and gluing operations. 

The selective actuation switch is one of the prominent features of this nail gun. It gives you the choice to select either sequential or contact nailing on a single flip without requiring any tool. 

To get more professional working out of it, you can do depth adjustments as per your choice and can fasten a variety of materials.

Tool-less nose operation provides you with an ease of quick nail extraction when a nail jam is indicated. It offers high maneuverability with its 4.2 lbs weight and easy grip. 

Aside from all the amazing attributes of the device, it somehow fails to satisfy the user with its low built quality. The brand needs to improve it. 

Pros
  • Actuation switch for dual firing modes
  • Great maneuverability
  • Integrated duster
Cons
  • Low built quality

But it’s a good crown molding nail gun that you can consider adding to your toolbox.  It is worth the price and the value.

Buying Guide For Crown Molding Nail Gun

We have maintained a list of some of the significant factors for you to consider when going to buy your best nail gun for crown molding. Make sure you contemplate these elements to investing your hard-earned money on the very right product. 

Type of Nail gun

There are different types of nail guns available in the market, but to deal with an intricate job like crown molding, we suggest you go with a nail gun that can work well with 15-18 gauge nails. In that league specifically, you can choose brad or finish nailer.

These types of nail guns can make your work smooth and precise. The fact these nailers are compatible with longer nails, allows them to work perfectly for crown molding. You can achieve a considerable level of firmness for long-lasting moldings.

The nose of Nailer

The nose of the nailer is one of the key features to take into consideration. Try to prefer the nail gun with a narrow nose and tool-free adjustment. This type of nose will make will be beneficial for you in two ways. 

Check Also Best Circular Saw Under 100

One is that it will allow access to confined spaces. As you know for crown molding, you have to come across corners to bind them. If your nailer’s nose isn’t of the right size you may have issues while dealing with the corners.  

The second perk of this type of nailer is that you can easily extract nails from the nose when facing any nail jam. Moreover, it will save your time for nail removal and fastening it back to its position. 

Depth Adjustment

The depth adjustment feature gives you a free and of selecting the depth of nail driving. Always choose a nail gun having multiple adjustment features to increase its versatility. You can make the most out of your purchase when you have the freedom to use it for a variety of materials.

Ergonomic Grip and Weight

The ergonomic build nail gun can be of great ease when you’re working on your longer projects. When you don’t get soft handling, work gets extended for hours because of the unnecessary pauses you might take because of the fatigue and tiredness you face when holding the nail gun. 

The weight of the gun also plays a key role in easy maneuverability and convenient handling. When you have to work head up for joining molding, you need to have a lightweight tool that is easily controllable and doesn’t affect the work precision and quality.

Power Source

Nail guns can be either corded or cordless. You must already be having an idea that a corded tool gets power directly from the power source. Whereas, a cordless tool is powered by a battery. 

The power given to a tool decides what type of tasks it can deal with. If you have to deal with a high-capacity task and portability isn’t required, then it’s better to go for a corded nailer. On the other hand, if you have to transport your nail gun to different job sites and do low-capacity tasks, then a cordless gun will be a power horse for you. 

FAQ’s 

What is the best nail gun for crown molding?

Makita AF506 is the best crown molding nail gun that can drive 18 gauge nails ⅝” to 2” effortlessly to different materials. This nailer features a narrow nose that is ideal to reach even compact spaces. You can choose it to deal with both soft and hardwood.

What type of nail gun to use for crown molding?

Look for a nail gun that offers quick nail firing and can allow depth adjustment. In addition, a nailer with a narrow nose can be of great use to approach even the confined spaces. And last but not the least, never look over the precision and accuracy because that is the core of your projects

Wrapping Up The Best Nail Gun For Crown Molding

We tried to narrow down the list of best nail gun for crown molding among the top-rated products available in the market. If you’ve looked through the entire article, you must have chosen the nail gun that fits perfectly with your budget and project needs. The rest of the process is over to you now. To make it even easier for you, we have our top three picks mentioned below. 

  • Makita AF506 is the brad nailer that you can purchase if your job involves approaching tight spaces. It’s a versatile nail gun that impeccably works for both hard and softwood. 
  • DEWALT DCN680D1 is a cordless brad nailer kit that offers great portability and easy handling. This is a quiet machine that offers quick jam releases and high durability. 
  • BOSTITCH BTFP1850K is an oil-free pneumatic brad nailer that comes with 7 years warranty. It can deal with crown molding along with numerous fitting and trimming jobs. 

Leave a Comment